Step 9: SmartDashboard Configuration
Check Point 61000 Security System Getting Started Guide R75.40VS for 61000 | 66
Virtual Network Device Configuration
If you chose the
Custom Configuration
option, the
Virtual Network Device Configuration
window
opens. In this window, define a Virtual Device with an interface shared with the VSX Gateway. If you
do not want to define a Virtual Device at this time, click
Next
to continue.
To define a Virtual Device with a shared interface:
1.
Select
Create a Virtual Device
.
2.
Select the
Virtual Network Device type
(
Virtual Router
or
Virtual Switch
).
3.
Select the
shared physical interface
to define a non-DMI gateway.
Do not select the management interface if you want to define a
Dedicated Management
Interface (DMI)
gateway. If you do not define a shared Virtual Device, a DMI gateway is created
by default.
Important
- This setting cannot be changed after you complete the VSX Gateway Wizard. If you
define a non-DMI gateway, you cannot change it to a DMI gateway later.
4.
Define the
IP address
and
Net Mask
for a Virtual Router.
These options are not available for a Virtual Switch.
5.
Optional:
Define a
Default Gateway
for a Virtual Router (DMI only).
