Getting Started with E91
9
2 Getting Started with E91
2.1
About the Receiver
The E91 GNSS receiver incorporates a GNSS engine, GNSS antenna, internal radio (410
MHz – 470 MHz), 4G cellular modem, Bluetooth and Wi-Fi in a ruggedized and
miniature unit that is easy for you to set up an all-in-one RTK rover or mobile base
station. Bluetooth and Wi-Fi technology provide cable-free communication between
the receiver and controller.
The receiver can be used as the part of a RTK GNSS system with HUAYI NAV LandStar
7 software. And you can download the GNSS data that recorded in the internal
memory of receiver to a computer.
To configure the receiver for performing a wide variety of functions, you can use the
web interface by connecting the receiver with PC or smartphone through Wi-Fi.
2.2
Parts of the Receiver
The operating controls are all located on the front panel. SIM card slot are on the
backside. Serial ports and connectors are located on the bottom of the unit.
2.2.1
Front Panel
The following figure shows the front panel of the receiver, it contains two indicator
LEDs and two buttons.
Satellite LED
Correction LED
Fn button
& Static LED
Power button
& Power LED