CHCNAV ALPHAUNI 900 USER MANUAL
| 2020-06
P a g e | 44
The project is named by creation date for example 20170509.
In the folder, the collected four files will be stored here:
xxxxxx_D.DMR: Recorded DMR data (if have).
xxxxxx_I.IMR: Recorded IMU data.
xxxxxx_S.TXT: Recorded the data sent by control board.
xxxxxx_T.TXT: Recorded GPS differential ephemeris data.
6.2.1.2
Export laser data
Connect the data copy line between DATA interface and PC, and the other end of the network
cable to computer network port. Power on the equipment, configure the network to
192.168.0.x (X can be any number other than 128) after the laser initialization is completed.
Enter
into the address field in My Computer and select laser data (RXP format)
to copy.
6.2.2
Automatic Copy
Connect the data copy line between DATA interface and PC first (both USB port and network
port) and then power on unit. Turn on the equipment and wait about 1 minute until the laser
initialization is completed. Click
CopyDataTool
software and enter the following interface:
