CHC LT500 Series, Getting Started Manual, Page: 15 / 23

 Page 14
 Choose a location to install the program, tap [Install] icon to start
installation.
NOTE : CHC recommends installing 3rd party software on
Device Memory and select the MMC Card to save your
projects data.
4.9. C
HARGE THE
B
ATTERY

Squeeze the latch catch of the battery, and then draw out the
battery from the battery slot.
 Connect male Jack connector of Power Adapter to the power port
of battery.
 Connect the Power Adapter socket to the mains 100-240 VAC to
start charging the battery.
NOTE 1 : You can also charge the battery without detach it
from the receiver. If the receiver is turned on, a charging icon
will show on the top right corner of the screen.
NOTE 2
: The LEDs of the battery will indicate the charging
state and the battery level.
SQUEEZE
Battery Level
Charing State