CHC LT500 Series, Getting Started Manual, Page: 14 / 23

 Page 13
 Using Bluetooth
Press the Windows Button or tap the windows icon → [Settings] →
[Bluetooth] → [Devices] tab → [Add new device…] → system will search for
Bluetooth Devices → select the device to connect with → [Next] → enter the
passcode → [Next], and then the Bluetooth connection has been
established.
Note: The password used for pairing Bluetooth devices can be
freely defined (e.g., 1234). Just make sure the same PIN code
is entered for two devices to be paired.
WARNING
: When deleting an existing Bluetooth connection,
please make sure to delete COM port first.
4.7. C
ONNECT TO
O
FFICE
C
OMPUTER
 To install software or access to LT500 Series receiver, you can use
your office computer and a Microsoft ActiveSync connection to
transfer the installation files from the computer to the LT500.
 It means Microsoft Windows Mobile Device Center or ActiveSync
should first be installed on your computer.
NOTE : You can choose the suitable version for your computer
and download this software for free from the Microsoft
website.
 Connect the LT500 with your computer by USB data cable.
 Turn on LT500, and wait the computer to establish synchronous
connection automatically through the installed synchronization
software.
 The synchronization software interface will appear on your
computer screen. You can follow the menus on the software
interface to browse the contents of LT500 and exchange data
between LT500 and your computer.
4.8. I
NSTALL
S
OFTWARE
 Make sure the LT500 is connected and synchronized with your
computer.
 Select and click on the installation file to install, or if the installation
file runs only on LT500, please copy the file to LT500 and click it to
install. You can also copy files to LT500’s relevant location to save
it.