SIMPLE LOGGER II
Deutsch
Page 73
2. PRÄSENTATION
2.1 Beschreibung
Der Simple Logger
®
II ist ein autonomer Datenlogger mit je nach Modell ein oder zwei analogen
Erfassungskanälen (Stromversorgung mit zwei Alkalibatterien).
Das Analogsignal wird abgetastet und in Digitalsignale umgewandelt. Die Daten werden verarbeitet, mit
Datum und Uhrzeit versehen und gespeichert. Über den optisch geschützten seriellen USB-Anschluss
(Universal Serial Bus) werden die gespeicherten Daten auf einen Computer übertragen.
Der Datenlogger bietet den großen Vorteil, dass alle Speicherfragen über die einfache und intuitive Software
DataView
®
gelöst werden.
Beim Messen von Wechselsignalen werden über die Signalfrequenz (in einem Bereich von ± 2Hz der
Nennfrequenz im 50 oder 60 Hz Netz) 64 Abtastvorgänge pro Periode durchgeführt.
Bei der TRMS*-Messung werden die Daten aus 64 Abtastvorgängen pro Periode verarbeitet, der Vorgang
wird 8 Mal Sekunde wiederholt. Die Oberschwingungsdaten berechnet die Software DataView
®
aus den
Daten dieser 64 Abtastvorgänge. (Die Eingangssignale zwischen zwei Messungen werden nicht
berücksichtigt).
Gleichstromsignale werden 8 Mal pro Speicherintervall gemessen.
*: TRMS = True Root Mean Square (wahrer Effektivwert).
2.2 Aufbau
2.2.1
Standardmodelle