Chauvin Arnoux C.A 757 User Manual Download Page 15

26

4. MAINTENANCE

 

 

Except for the batteries, the instrument contains no 

parts that can be replaced by personnel who have not 

been specially trained and accredited. Any unauthor-

ized repair or replacement of a part by an “equivalent” 

may gravely impair safety.

4.1. CLEANING

Disconnect the instrument completely.

Use a soft cloth, dampened with soapy water. Rinse with a 

damp cloth and dry rapidly with a dry cloth or forced air. Do 

not use alcohol, solvents, or hydrocarbons.

4.2. REPLACEMENT OF BATTERIES

If the 

 symbol is displayed during a measurement, you 

must replace the batteries. 

 

„

Disconnect the instrument completely.

 

„

Refer to §1.3 for the replacement of the batteries.

 

Spent batteries must not be treated as ordinary house-

hold waste. Take them to the appropriate recycling 

collection point.

5. WARRANTY

Except as otherwise stated, our warranty is valid for 

twelve 

months

 starting from the date on which the equipment was 

sold. Extract from our General Conditions of Sale provided 

on request.

 

„

The warranty does not apply in the following cases:

 

„

Inappropriate use of the equipment or use with incompatible 

equipment;

 

„

Modifications made to the equipment without the explicit 

permission of the manufacturer’s technical staff;

 

„

Work done on the device by a person not approved by the 

manufacturer;

 

„

Adaptation to a particular application not anticipated in the 

definition of the equipment or not indicated in the user’s 

manual;

 

„

Damage caused by shocks, falls, or floods.

北京海洋兴业科技股份有限公司 电话:010-62176775

Summary of Contents for C.A 757
















Reviews: