Operation
-12-
Synapse 4 User Manual Rev. 2
Schedule Setup
This option allows you to set 8 different events that turn on/off each of the power outputs at
specific scheduled times.
1. Go to the
Scheduler
main level.
2. Select
Event 1–8
•
Select
On
or
Off
.
3. Select
SchedulerOn/Off
•
Select
On
or
Off
4. Select
Power Output
a. Choose
All Power Ports
•
Select
All Power Ports On
•
Set the delay to turn on (
0-120 s
).
•
Select
All Power Ports Off
•
Set the delay to turn off (
0-120 s
).
b. Choose
Power Port
(
1
,
2
,
3
, or
4
)
•
Select
Power Port
(
1
,
2
,
3
, or
4
)
On
•
Set the delay to turn on (
0-120 s
).
•
Select
Power Port
(
1
,
2
,
3
, or
4
)
Off
•
Set the delay to turn off (
0-120 s
).
•
Repeat for each power port number
5. Select
Week Setup
•
Select
Monday
–
Friday
or
Everyday
6. Select
Time Setup
a. Enter the hour (
00:
)
b. Enter the minutes (
:00
)
Backlight
This setting allows you to set the amount of time the backlight on the
Synapse 4’s display stays on after the last button is pressed on the control panel.
1. Go to the
Back Lite
main level.
2. Select
On
(remains on),
10S
(10 seconds),
20S
(20 seconds), or
30S
(30 seconds).
Software
Information
This option shows what version of software the Synapse 4 is running.
1. Go to the
Information
main level.
2. Select
Version
and the version number will show on the display.
Fixture Hours
This option shows the total amount of hours the Synapse 4 has been turned on.
1. Go to the
Information
main level.
2. Select
Fixture Hours
and the total number of hours will show on the display.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
DMX Personality
.
2. Go to the
DMX Address
main level.
3. Select the starting address (
001–512
).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality
DMX Address
1 Ch
512
4 Ch
509
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the
DMX Channel
main level.
2. Select the desired personality (
1 Ch,
or
4 Ch
).
•
See the
DMX Values
section for the highest starting address you can select for each
personality.
•
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
Summary of Contents for Synapse 4
Page 1: ...User Manual ...
Page 4: ......
