Operation
-20-
Rogue™ R1 Beam User Manual Rev. 2
System
Information
This programming level shows standard information regarding the product’s operating status.
•
Starting from the Main Level screen, select
Sys Info,
press
<ENTER>
.
•
Ver:
The current software version is displayed on the screen.
•
Running Mode:
The current Running mode is displayed on the screen.
•
DMX Address:
The current DMX address is displayed on the screen.
•
Temperature:
The current product temperature is displayed on the screen.
•
Lamp On Time:
The amount of hours the lamp has been on is displayed on the screen.
•
Remain Time:
The time remaining in the maintenance cycle is displayed on the screen.
Offset Mode
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, Press and hold
<MENU>
until the password screen
appears.
2. Using
<UP>
to increase the number value and
<DOWN>
to move to the next column,
enter
2323
, press
<ENTER>
. This brings you into the Zero Adjust menu screen.
Pan
1. Highlight
PAN
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Tilt
1. Highlight
TILT
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Dimmer 1
1. Highlight
DIMMER1
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Dimmer 2
1. Highlight
DIMMER2
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Gobo
1. Highlight
GOBO
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Color
1. Highlight
COLOR
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Prism 1
1. Highlight
PRISM1
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Rotating Prism 1
1. Highlight
R-PRISM1
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Prism 2
1. Highlight
PRISM2
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Rotating Prism 2
1. Highlight
R-PRISM2
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Focus
1. Highlight
FOCUS
, press
<ENTER>
.
2. Select
000–255
, press
<ENTER>
.
Summary of Contents for Rogue R1 Beam
Page 1: ...User Manual ...
