Operation
-32-
NEXT NXT-1 User Manual Rev. 8
Operating Settings Configuration
Home Screen
The NEXT NXT-1 has a home screen that shows the protocol mode, the IP address or DMX
address, the DMX personality, and the current product temperature. To see the home screen,
press
<MENU/ESC>
repeatedly until it shows on the display.
Pan/Tilt
Orientation
To set whether the pan or tilt orientation is normal or inverted:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Motor Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Pan Inverse
(for pan orientation) or
Tilt Inverse
(for tilt
4.
orientation).
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select from
No
(for normal) or
Yes
(for inverted).
6.
Press
<ENTER>
.
7.
Motor Offset
The motor offset determines where a DMX value of 0 is on the pan axis and tilt axis. To adjust
the pan offset or tilt offset:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Motor Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Motor Offset
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select
Pan
or
Tilt
.
6.
Press
<ENTER>
.
7.
Use
<UP>
or
<DOWN>
to increase or decrease the offset value, from
0–255
.
8.
Press
<ENTER>
.
9.
Display Time Out
To set how long the display can be inactive before the backlight turns off:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Display Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Back Light
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select from
On
(always on),
10S
(10 seconds),
20S
(20 seconds),
6.
or
30S
(30 seconds).
Press
<ENTER>
.
7.
Display Backlight
Dimmer
To set the intensity of the backlight:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Display Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Back Light Dimmer
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to increase or decrease the dimmer value, from
1–100
.
6.
Press
<ENTER>
.
7.
Display
Orientation
To set whether the display orientation is normal or inverted:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Display Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Display Inverse
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select from
No
(for normal) or
Yes
(for inverted).
6.
Press
<ENTER>
.
7.