Page 14 of 98
O
PERATION
Helicopter Q6 User Manual Rev. 1
IRC-6 Infrared Remote Control
The Helicopter Q6 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1.
Press
<MENU>
repeatedly until
SEt
shows on the display.
2.
Press
<ENTER>
to accept.
3.
Press
<UP>
or
<DOWN>
to select
on
or
oFF
.
4.
Press
<ENTER>
.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press
<AUTO>
on the IRC-6.
2.
Press
<AUTO>
repeatedly to cycle through auto programs, or
Press
<0>–<9>
to choose an auto program.
To adjust the speed of the automatic program:
1.
Press
<SPEED>
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1.
Press
<SOUND>
on the IRC-6.
2.
Press
<SOUND>
repeatedly to cycle through programs, or
Press
<0>–<9>
to choose a sound-active program.
Manual Mode
To set the Helicopter Q6 in manual mode and choose a static color with the IRC-6:
1.
Press
<R>
(red),
<G>
(green),
<B>
(blue), or
<W>
(white) on the IRC-6.
To control the rotation direction with the IRC-6 in manual mode:
1.
Press
<A>
to toggle clockwise or counter-clockwise rotation.
To control the rotation speed with the IRC-6 in manual mode:
1.
Press
<SPEED>
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the rotation speed.
To adjust the strobe rate of the static color:
1.
Press
<STROBE>
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the strobe rate.
Black Out
To black out the lights:
1.
Press
<BLACK OUT>
on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing
<BLACK OUT>
.
You may have inadvertently activated Black Out.