GigBAR 2.0 User Manual Rev. 2
Page 33 of 156
5. T
ECHNICAL
I
NFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. To maintain
optimum performance, clean the product at least twice a month.
However, usage and environmental conditions contribute to increasing the cleaning frequency.
To clean the product, follow the instructions below:
Unplug the product from power.
1.
Wait until the product is at room temperature.
2.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
3.
external surfaces and fan vents.
Clean the transparent panel (laser aperture) with a mild solution of non-ammonia glass
4.
cleaner or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
5.
Softly wipe any dirt or grime to the outside edges of the glass.
6.
Gently polish the transparent surface until they are free of haze and lint.
7.
Always dry the optical surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could damage it.
