Page 3 of 31
Introduction
ÉPIX Flex Drive User Manual Rev. 1
2. Introduction
Description
The ÉPIX Flex Drive controls the ÉPIX Flex 20 with 2 plug and play outputs that drive up to 4 ÉPIX Flex 20
products at 960 LEDs each. Adding an ÉPIX Flex Boost to each output doubles the capacity of the drive to
1920 LEDs or 8 ÉPIX Flex 20, which reduces cost per linear feet. To ease installation, the ÉPIX Flex Drive
allows for 75ft of extension cables between it and the first ÉPIX Flex 20. Use either pixel control or its
simplified 17 / 34-channel control personalities to support changing colors and built-in automatic programs.
A webserver is supported for remote configuration and for firmware updates.
Features
•
The processing and power center of the ÉPIX Flex system drives the ÉPIX Flex 20 pixel product.
•
Versatile control options include DMX, Art-Net™ and sACN (streaming ACN) to support the touring/
rental/installation markets.
•
Quickly and easily configure the ÉPIX Flex Drive using the built-in OLED display and menu.
•
Easily configure your ÉPIX Flex 20 by assigning the pixel count/output (2 total).
•
Supports up to 4 ÉPIX Flex 20 5 meter rolls, or up to 8 with the ÉPIX Flex Boost (sold separately).
•
Easily daisy chain fixtures directly from the 2 outputs of the Flex Drive.
•
Advanced power management design allows you to position the ÉPIX Flex Drive up to 50 ft away
from your first ÉPIX Flex 20.
•
Works with Arkaos Media Master Express for a plug-n-play system that requires almost no training
to operate.
•
Supports RDM over Art-Net™ and full webserver interface for remote configuration and firmware
updates.
•
Multiple control personalities offers flexibility for detailed pixel-level control or simplified plug and
play options using the 17/34 channel modes.
Product Overview
Menu
Buttons
LED
Display
ÉPIX Flex
Products Output
Ethernet
Ports
Indicator
LEDs
Power
In
DMX
In/Out
Fuse
Holder
Fan
10A Circuit Breakers
Power
Switch
Summary of Contents for EPIX Flex Drive
Page 1: ...User Manual ...