Page 11 of 31
Operation
ÉPIX Flex Drive User Manual Rev. 1
Configuration (Ethernet and DMX)
The ÉPIX Flex Drive operates by routing Art-Net™, sACN, or DMX to the ÉPIX Flex 20 and ÉPIX Flex
Boost products linked to the outputs of the Drive. The protocol must be set for the products to respond
correctly to the controller. See the
Menu Map
for more information on menu options.
Operating Mode
To configure the control protocol for the ÉPIX Flex Drive, follow the instructions below.
1. Press
<MENU>
repeatedly until
1.Operating Mode
is selected.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select from
1.Standalone
,
2.Art-Net
,
3.sACN
, or
4.DMX
.
4. Press
<ENTER>
.
Personality
The ÉPIX Flex Drive uses Art-Net™, sACN, or DMX for its 3 control personalities:
To select the control personality for either port, do the following:
1. Press
<MENU>
repeatedly until
2.Personality
is selected.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select from
1.17 Channel
,
2.34 Channel
, or
3.Pixel
.
4. Press
<ENTER>
.
6.Standalone
Mode
1.User Color
1.Red:
000–255
Combine red, green, and blue to make a
custom color
2.Green:
3.Blue:
2.Preset Color
1.Red
Preset static colors
2.Green
3.Blue
4.Cyan
5.Magenta
6.Yellow
7.White
3.Automatic
1.Program:
000–042
Selects an automatic program
2.Speed:
000–100
Sets the automatic program speed
7.Set LCD
Backlight
On
Display backlight always on
30s
Turns off display backlight after 30 seconds
of inactivity
8.Set Display
Normal
Rotates display 180°
Inverted
9.Factory
Reset
NO
Resets the product to factory defaults
YES
10.Fixture
UID
_ _ _ _ _ _ _ _ _ _ _ _
Shows product UID
11.Firmware
Version
B_._ V_._–_._
Shows current firmware version
Personality
Channels
Description
17 Channel
17
Dimmer, foreground and background RGB control, strobe, auto
programs, program speed, and offset, test mode
34 Channel
17 per output
Enables output ports to be addressed separately for individual
17-channel control
Pixel
720 per ÉPIX Flex 20
Complete pixel control. Only 170 LEDs are accessible by DMX.
An ethernet protocol (Art-Net™ or sACN) with multiple
universes must be used to access all connected LEDs.
Main Level
Programming Levels
Description
Summary of Contents for EPIX Flex Drive
Page 1: ...User Manual ...