Page 10 of 31
ÉPIX Flex Drive User Manual Rev. 1
Operation
4. Operation
Control Panel Operation
Device Status Screen
The home screen of the ÉPIX Flex Drive displays the current control protocol, the address of each output,
the personality, and whether there are ethernet connections or a DMX connection.
To access the Device Status screen, press and hold
<MENU>
for 3 seconds, or leave the display inactive
for 30 seconds.
From the Device Status screen, press
<MENU>
to access the main menu, or press
<ENTER>
to access
the Port Setup menu.
Menu Map
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Enables the currently displayed menu or sets the currently selected value in to the current
function
<DOWN>
Navigates upward through the menu list or increases the numeric value when in a function
<ENTER>
Navigates downward through the menu list or decreases the numeric value when in a function
Main Level
Programming Levels
Description
1.Operating
Mode
1.Standalone
Selects the control protocol
2.Art-Net
3.sACN
4.DMX
2.Personality
1.17 Channel
Sets the control personality (see
Control
Personalities
)
2.34 Channel
3.Pixel
3.Port Setup
1.Output 1
1.DMX Start
Address
1–496
Sets the starting address for Output 1
2.Network
Universe
0–256
Sets the lowest of the consecutive universes
to which Output 1 is assigned (range
determined by Operating Mode)
3.LED
Quantity
1–960
Sets the number of LEDs controlled by
Output 1
2.Output 2
1.DMX Start
Address
1–496
Sets the starting address for Output 2 in 34
Channel mode and Pixel mode
2.Network
Universe
0–256
Sets the lowest of the consecutive universes
to which Output 2 is assigned (range
determined by Operating Mode)
3.LED
Quantity
1–960
Sets the number of LEDs controlled by
Output 2
4.Set IP
Mode
1.Manual IP
_ _ _._ _ _._ _ _._ _ _
Sets a custom IP address (0–255)
2.Static IP
Sets a preset IP address
5.Set
Netmask
A. 255.000.000.000
Sets the net mask
B. 255.255.000.000
C. 255.255.255.000
Summary of Contents for EPIX Flex Drive
Page 1: ...User Manual ...
