Page 10 of 29
Setup
COLORado Batten Q15 User Manual Rev. 1
Mounting Products Attached in Series
1. Attach the base plate to the first product in the series. (See
)
2. Attach an omega bracket to the base plate, and a clamp to the omega bracket.
3. Attach the clamp to the desired structure or surface.
4. Attach a safety cable to the product’s safety loop.
Never attach more than 2 products together when hanging vertically from a single
mounting point.
Attach the Safety Cable of the first
product to the mounting point
Attach the Safety Cables of the
following products to the Bracket
of the preceding product