4. Operating Instructions
12
1/17/2011 6:15 PM
Master/Slave Mode (Auto, Sound active)
When additional (slave) fixtures are daisy chained to the master, they will all synchronize with the
master and run the same lighting show.
Please see the instructions below for details on this mode.
Master:
1.
Place the master fixture
first
in the daisy chain.
2.
Set the master fixture to operate in either automatic or sound-active mode;
please see
the appropriate sections of this manual for details on this procedure
.
Slave:
1.
Daisy chain from the output of the master fixture.
2.
Press
<MENU>
until
SLAu
appears on the LED screen.
3.
Press
<ENTER>
.
Plug the master fixture in LAST!
Only connect a maximum of 31 slave fixtures when operating in this mode!
Standalone
Sound-Active
Please see the instructions below for details on this mode.
1.
Plug the fixture into power.
2.
Press
<MENU>
until
SOUn
appears on the LED screen.
3.
Press
<ENTER>
.
4.
Press
<MENU>
until
SE.00~31
appears on the LED screen.
5.
Using
<UP>
&
<DOWN>,
adjust the microphone sensitivity (
S_ _1~S100
).
6.
Press
<ENTER>
.
The microphone will only respond to low frequencies (bass).
Auto-Selection
Please see the instructions below for details on this mode.
1.
Plug the fixture into power.
2.
Press
<MENU>
until
Pr.01~42
appears on the LED screen.
3.
Press
<ENTER>
.
4.
Using
<UP>
&
<DOWN>,
adjust the desired program.
5.
Press
<ENTER>
.
The playback speed is not adjustable in this mode.
Summary of Contents for Circus
Page 1: ...User Manual ...