Page 7 of 12
Operation
W-DMX Micro T-1 TRX G5 User Manual Rev. 1
Basic Setup
The following sections detail how to link and unlink the W-DMX Micro T-1 TRX G5 with compatible devices.
Linking Devices
In optimal conditions, the W-DMX Micro T-1 TRX G5 can operate up to 300 m (900 ft) away from any
linked device. The W-DMX Micro T-1 TRX G5 transmitter must be paired with the W-DMX receiver of the
compatible device for wireless operation. To pair the devices:
Press the yellow function button, on the transmitter, for
1 second
, until the
LINK
LED starts flashing. The
LINK
LED of each receiver will flash for 5 seconds and stay static once linked up.
Linking Multiple Devices
Each transmitter can be linked up to an infinite number of receivers. To link multiple W-DMX Micro T-
1 TRX G5 transmitters with multiple receivers, follow the instructions above but power on only the devices
that need to be paired up, and turn off all the receivers that do not need to be paired up.
Unlinking Devices
There are two ways to unlink devices—individual or group unlink.
Individual unlink
Press and hold the yellow function button,
on each receiver, for 5 seconds
. The LINK LED should turn off.
Group unlink
Press and hold the yellow function button,
on the transmitter, for 5 seconds
. All paired and powered
receivers will unlink.
•
All available receivers that are turned on and compatible with the transmitter’s radio
mode will pair with the transmitter.
•
W-DMX operation can be interrupted or inhibited by liquid masses between the
transmitter and receiver such as water, snow, or people. For best results, keep the area
between the transmitter and receiver clear of any liquid mass.
Once a WDMX receiver has been linked to a specific WDMX transmitter, it will remain linked
to that specific transmitter until it is linked to a different one.
