Page 25 of 32
Rogue Outcast 1 Hybrid User Manual Rev. 2
O
PERATION
Configuration (Standalone)
Use the standalone configuration to operate the product without a DMX controller.
Run Mode
This programming level sets the DMX personality and controls the different test modes.
•
Starting from the Main Level screen, select
Run Mode,
press
<ENTER>
.
Auto Test
This option runs every attribute individually through one cycle.
•
Highlight
Auto Test
, press
<ENTER>
.
Manual Test
This option allows each attribute to run individually or as a group.
1.
Highlight
Manual Test
, press
<ENTER>
.
2.
Highlight the desired attribute listed on the control panel screen, press
<ENTER>
.
3.
Set the attribute value (
000–255
), press <
ENTER
>.
4.
Repeat step 2 for the other attributes.
Setup
This programming level controls the product’s head movement, display, dimming, lamp settings, and
maintenance adjustments.
•
Starting from the Main Level screen, select
Setup,
press
<ENTER>
.
Pan Reverse
Reverses the operation of the pan attribute.
1.
Highlight
Pan Reverse
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>
.
Tilt Reverse
Reverses the operation of the tilt attribute.
1.
Highlight
Tilt Reverse
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>
.
Pan Angle
This option assigns pan range.
1.
Highlight
Pan Angle
, press
<ENTER>
.
2.
Select
540
,
360
, or
180
, press
<ENTER>
.
Tilt Angle
This option assigns tilt range.
1.
Highlight
Tilt Angle
, press
<ENTER>
.
2.
Select
90
,
180
, or
260
, press
<ENTER>
.
BL.O. P/T Move
Enables/disables blackout on pan/tilt move.
1.
Highlight
BL.O.P/T Move
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>.
BL.O. Color Move
Enables/disables blackout on color wheel move.
1.
Highlight
BL.O.Color Move
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>.
BL.O. Gobo Move
Enables/disables blackout on gobo wheel move.
1.
Highlight
BL.O.Gobo Move
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>
.
The Auto Test will end after one full cycle. You can stop the test by pressing <MENU> at
any time.
When exiting the Manual Test level, the values of all tested channels will revert to zero.
Summary of Contents for ROGUE
Page 1: ...USER MANUAL ...