
Page 19 of 25
Ovation P-56FC User Manual Rev. 4
O
PERATION
Master/Slave
The Master/Slave mode allows a group of Ovation P-56FC products (the slaves) to simultaneously
duplicate the output of another Ovation P-56FC (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the
Master/Slave
main level
2.
Select
Slave
.
To set the master:
1.
Go to the
Master/Slave
main level
2.
Select
Master
.
3.
Select a static setting.
Dimmer Profiles
This setting determines how fast the output of the Ovation P-56FC changes when you modify the output value.
This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
1.
Go to the
Dimmer Mode
main level.
2.
Select a dimmer curve (
Off
,
Dimmer 1
,
Dimmer 2
, or
Dimmer 3
).
White Balance
This setting determines the maximum output values for each color, which affects the appearance of a full
output white.
1.
Go to the White Balance main level.
2.
Select
Off
(the product will use a default setting) or
Manual
.
3.
For
Manual
mode, select the color value to edit (
Red
,
Green
,
Blue
,
Amber
, or
Lime
).
4.
Set the maximum value for the selected color (
125–255
).
5.
Repeat steps 3 and 4 until the product outputs as desired.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation P-56FC.
1.
Go to the
LED Frequency
main level.
2.
Select PWM Frequency (
600Hz
,
1200Hz
,
2000Hz
,
4000Hz
,
6000Hz
, or
25Khz
).
Fan Mode
This setting determines how the fan speed on the Ovation P-56FC is set.
1.
Go to the
Fan Mode
main level
2.
Select
Auto
(fan speed will increase or decrease based on product temperature),
Off
(fan will
stay off. Product output will decrease based on product temperature),
Silent
(fan will maintain a
constant silent speed), or
On
(fan speed will always be at maximum).
•
The master is the one that runs a program whether in Auto or Virtual Color Wheel mode.
•
Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Off:
The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3:
The output follows the dimmer value based on the corresponding dimmer
curve,
Dimmer 1
being the fastest.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off, output of the fixture will be reduced and
will not reach the same levels as when using other fan modes.
!
Summary of Contents for OVATION P-56
Page 1: ...User Manual ...