Page 18 of 33
Connecting (Cabling) Each F2
F2 User Manual Rev. 1
6. Connecting (Cabling) Each F2
Testing Signal and Power Connections
Each F2 has 2 power sockets and 2 signal ports.
•
The Power and Signal connections are located on the underside of the service module of each
panel.
•
The Signal ports may be used interchangeably.
•
Each F2 has LED indicator lights on the test button in the center of the panel.
•
Each panel indicates a successful power connection when the Power indicator light remains red.
•
Each panel indicates the presence of a signal when the Signal LED indicator light blinks green
quickly. When the LED blinks green slowly, there is no signal.
Using the F2 Test Button
Each F2 has a Test button, used to ensure all LEDs are functional. Use the Test button on each panel to
perform a self-test. If self-testing, you must perform the test individually for each F2. You do not need to
connect to a signal or use software.
To use the Test button, you must connect the power, but do not connect the signal cables. Press the Test
button to toggle through various LED light display configurations.
When using the Test button, make sure the F2 is NOT connected to the VIP Drive 43Nova 2
or VIP Drive 83R Nova.
Rear Panel View
Underside of Service Access View
Test Button
Power/Signal
Indicator LEDs
Signal Connections
Power In/Out
Summary of Contents for F2
Page 1: ...User Manual ...