Page 17 of 33
F2 User Manual Rev. 1
Joining Each F2 (Creating a Modular Design)
Horizontally Joining the Panels
Each F2 can be easily joined horizontally using the Speego connections on the inside, upper and lower left
sides of each panel.
Horizontal Panel Connection
Use the following instructions to join panels horizontally:
1.
Align each of the panels’ male Speego connections with the corresponding female connections
on the panels being added.
2.
Push male Speego connections into female Speego connections.
3.
Turn the spring knobs clockwise until secure.
4.
Turn the tightening latches counter-clockwise until secure.
Due to tolerances in the materials, as well as wear and tear of the latches, some tightening
latches may not line up when tightened. This is normal.
Summary of Contents for F2
Page 1: ...User Manual ...