ÉPIX Bar Tour QRG
EN
2
About This
Guide
The ÉPIX Bar Tour Quick Reference Guide (QRG) has basic product information such as
connection, mounting, menu options, and DMX values. Download the User Manual for the ÉPIX
Drive 900 from
for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED
WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS
PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico
www.chauvetlighting.com/warranty-
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, and Germany
www.chauvetlighting.eu/warranty-registration
Chauvet warrants that this product shall be free from defects in material and workmanship under
normal use, for the period specified in, and subject to the exclusions and limitations set forth in
the full limited warranty on our website. This warranty extends only to the original purchaser of
the product and is not transferable. To exercise rights under this warranty, you must provide
proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES. This warranty gives you specific legal rights. You may also have other rights
that vary from state to state and country to country. This warranty is valid only in the United
States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety
Notes
•
DO NOT open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•
CAUTION: This product’s housing may be hot when lights are operating.
•
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product while operating or
connected to power.
•
CAUTION: When transferring product from extreme temperature environments, (e.g.
cold truck to warm humid ballroom) condensation may form on the internal electronics of
the product. To avoid causing a failure, allow product to fully acclimate to the
surrounding environment before connecting it to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT operate this product outdoors or in any location where dust, excessive heat,
water, or humidity may affect it. (IP20)
•
DO NOT operate this product if the housing or I/O ports appear damaged. Have the
damaged parts replaced by a Chauvet certified technician at once.
•
DO NOT connect this product to a dimmer or rheostat.
•
ONLY connect this product to an ÉPIX Drive 900 or an ÉPIX Drive 2000 IP.
•
ONLY use the hanging/mounting bracket to carry this product.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at
higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your
distributor to request support or return a product. Refer to
at the end of this QRG for
more information.
What Is
Included
•
ÉPIX Bar Tour
•
White Frost Filter
•
Quick Reference Guide