Chattanooga Saunders, User Manual

Page: 6 / 44

6 / 43 ENGLISH
PREPARING FOR TREATMENT
1 Place the Saunders Lumbar Traction device in its case on a firm surface or bed
with the wheels facing up
2 Remove the wheels and unzip the case Open case lid toward the head of the bed
or treatment surface
3 Remove the hand pump from the mesh storage compartment Place the hand
pump next to the device
4 Open the buckles on each of the harnesses Position the lower harness so it is
slightly overlapping the upper harness
5 Have a clock, timer or wrist watch available to time your treatment
APPLYING TRACTION
1 Lie down on the Saunders Lumbar Traction device so that the lower harness is one
inch over the top of your hips
NOTE: The top edge of the lower harness should be positioned just under your navel. See Figure 2.
Figure 1. Components of the at home Lumbar Traction device
COMPONENTS
Carrying
Handle
Lower Harness
Belt
Upper Harness
Pump Storage
Compartment
Hand Pump
with Gauge
Buckle
Belt Organizer
Carrying Case
Wheel and User
Guide Storage
Compartment
Wheels