RSR-000886-000 (1)
Page
27
of
40
5.1.2.
Cleaning the Large Massage Ball
Step 1.
Remove the elastic band from the large massage
ball treatment head.
Step 2.
Unscrew the top portion of the large massage ball
treatment head (
Figure 26
).
Step 3.
The ball can now be removed for cleaning. Use a soft,
non-fibrous wipe (e.g., Kimwipes
®
) moistened with 70% isopropyl alcohol
solution. Do not wipe with a dry cloth, always dampen the cloth before wiping.
Step 4.
Ensure that all cleansers have evaporated and the parts are dry before re-
assembly and use.
Step 5.
Reassemble treatment head by replacing the massage ball and screwing the
top portion securely on the treatment head.
Caution:
Dropping the ball, may damage the ball and plastic housing. If significant
damage has occurred, discontinue use. Ensure the ball is clean and free of debris that
could cause damage over continued use.
If there are scratches on the massage ball:
There will be minor scratches on the massage ball resulting from
normal use. These will not affect the efficacy of the laser treatment.
Figure 27
shows a massage ball treatment head with a ball that has
some minor scratches.
Figure 26
Recommendation:
Be careful when unscrewing the top portion of the treatment head.
It is recommended that this be done over a table to reduce the chance of dropping the
ball directly on the floor.
Figure 27
Figure 28
Recommendation:
If scratches in the large massage ball
become significant (
Figure 28
), replace the massage ball
treatment head.
