15 700 02 0319
Device Description
12
Attaching the transport base plate
• To reattach the base plate, place the hook-and-loop tape underneath the base
plate.
• Lift the device onto the base plate so that the ribs on the transport base plate
fit into the slits on the bottom of the device (see
• Fasten the hook-and-loop tape around the transport handle.
ATTENTION!
Always
attach the transport base plate when repackaging the device for
transport.
3.5
Installation Instructions
3.5.1
Handpiece components
1
2
3
4
5
6
7
8
1
Handpiece handle
2
Projectile
3
Allen key (see Cleaning / Overhaul)
4
Guide tube
5
Shaft
6
Open-end spanner
7
Pulse transmitter insert
8
Pulse transmitter screw caps
3.5.2
Assembling the handpiece
• Assemble the handpiece as follows:
• Remove the guide tube and the projectile from the
handpiece packaging.
• Unscrew the shaft from the handpiece and pull it
out of the handpiece handle.
• Use the supplied open-end spanner for this purpose.
