Chattanooga Intelect Mobile Stim 2777 User Manual Download Page 4 | Manualshive

Page: 4 / 66

background image

Intelect® Mobile Stim

FOrEwOrd

1

This manual has been written for the users of the Intelect Mobile Stim units. It contains general information on the operation,

precautionary practices, and maintenance information. In order to maximize use, efficiency, and the life of the unit, read this manual

thoroughly and become familiar with the controls, as well as the accessories before operating the system.
Specifications put forth in this manual were in effect at the time of publication. However, owing to DJO, LLC's policy of continual

improvement, changes to these specifications may be made at any time without obligation on the part of DJO, LLC.
Before administering any treatment to a patient, the users of this equipment should read, understand, and follow the information

contained in this manual for each mode of treatment available, as well as the indications, contraindications, warnings, and precautions.
Consult other resources for additional information regarding the application of electrotherapy.

Product Description

The Intelect Mobile Stim, designed and manufactured by DJO, offers a new dimension in clinical electrotherapy made possible by software

design and digital signal processing.
Effectiveness of this treatment is dependent upon correct use. If treatment times are exceeded, the therapy may not result in positive

clinical outcomes.
Stay current with the latest clinical developments in the field of electrotherapy. Observe all applicable precautionary measures for

treatment.
Keep informed of appropriate indications and contraindications for the use of electrotherapy.
This equipment is to be used only under the prescription and supervision of a licensed practitioner.

NOTe:

The Intelect Mobile Stim unit was calibrated during the manufacturing process. The unit is ready to be placed into service upon

delivery.

© 2011 DJO, LLC. All rights reserved. Any use of editorial, pictorial, or layout composition of this publication without express written consent from DJO, LLC is strictly prohibited. This publication was

written, illustrated, and prepared for distribution by DJO, LLC.

«
...
2
3
4
5
6
...
»

Summary of Contents for Intelect Mobile Stim 2777



































































Reviews:

No comments

Related manuals for Intelect Mobile Stim 2777

Brand: ABB Pages: 86

Brand: dbx Pages: 12

Brand: dbx Pages: 13

Brand: dbx Pages: 72

Brand: dbx Pages: 11

Brand: dbx Pages: 16

ENET-232 Series

Brand: National Instruments Pages: 105

Brand: Octane Fitness Pages: 20

Brand: Oceaneering Pages: 27

Brand: Vatech Pages: 137

Brand: Vatech Pages: 68

Brand: Varytec Pages: 52

Brand: Fagor Pages: 92

Brand: Petzl Pages: 15

Brand: Ametek Pages: 20

L10 LVELED Series

Brand: Clevetronics Pages: 2

Brand: Goobay Pages: 20

Brand: Softing IT Networks Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands