3
Principles of Operation
• Initial Setup Instructions
• System Components
- Standard and Optional Accessories
• Operator Interface
- Operating Controls
Initial Setup Instructions
Remove the Intelect
®
Legend US unit and any additional items ordered from the carton and inspect
for damage that may have occurred during shipment. Check the voltage rating on the serial decal
located on the bottom of the unit. Plug the system power supply in to a 120 Volt to 220/240 Volt AC
outlet, as required. DO NOT attempt to use Direct Current (DC). DO NOT attempt to use the unit if it
is not properly grounded. DO NOT place unit in a location where the power cord could be tripped over
or pulled out during treatment. Follow the procedures listed in the precautionary instructions located
later in this section.
System Components
The following accessories are included (standard) with your Intelect Legend Combo.
Item
Part#
Description
1
78047
Applicator, Ultrasound 5 cm
2
2
4248
Conductor
™
Gel
3
78201
Operator’s Manual
Optional Accessories
The following is a list of optional accessories available for the Intelect Legend Combo.
Item
Part#
Description
1
78046
Applicator, Ultrasound 10 cm
2
2
78048
Applicator, Ultrasound 2 cm
2
Operator Interface
The operator interface consists of an illustrated control panel with light emitting diodes (LED) and a
liquid crystal display (LCD). The operator is able to view parameter options on the LED and LCD
readouts and make selections by touching the designated area of the control panel. The displays will
provide continual information during the treatments concerning amplitude and elapsed time.
Ultrasound and stimulation intensities are adjusted with control panel buttons adjacent to the
corresponding LED display. The stimulation / ultrasound output can be stopped by pressing the
“PAUSE” or “STOP” buttons located at the bottom of the control panel.
