10
INTELECT LEGEND COMBO
Precautions should be observed in the presence of the following:
• Following recent surgical procedures especially when muscle contractions could disrupt the healing process.
• Where sensory nerve damage is present by a loss of normal skin sensation.
• When there is a tendency to hemorrhage following acute trauma or fracture.
• Over the menstruating uterus.
• Some patients may experience skin irritation or hypersensitivity due to the electrical stimulation or the electrical
conductive medium. The irritations can usually be reduced by the use of an alternate conductive medium or alternative
electrode placement.
Adverse Effects
• Skin irritation and burns beneath the electrodes have been reported with the use of therapeutic electrical stimulation.
HAND HELD PROBE (Optional)
HIGH VOLT Probe
The High Volt probe is used to deliver stimulation manually. Select the High Volt waveform then simply plug the Black lead
wire into the connector of the Probe. The Red lead wire from the same channel should be attached to an electrode and
placed near the treatment site. The default polarity for High Volt is positive. When using this setting, the Red lead is
positive and the Black lead is negative.
• Select the parameters you wish to change then press the start button to begin treatment.
N
Noottee: Place the ground electrode as close to the treatment site as possible where it will not interfere with placement of
the active electrode; for example, do not place the ground electrode on the leg if you are treating the arm.
