FLOOR SUPPORTED CUBE-IT
IIS-739928, 11/7/18, Rev. 1, CPI/JAG
800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected]
For international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing or
the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc.
Page 1 of 5
Installation Instructions
Safety Information
WARNING
: Improper use of this product or failure to follow these
instructions may result in equipment damage, personal injury, or
death. Read and understand all instructions for proper installation
and use of this product.
WARNING
: Before loading equipment in the cabinet, be sure all
parts and hardware are properly installed and tightened.
Intended Use
Install Floor Supported Cube-IT only in indoor, environmentally controlled areas;
do not use outdoors, in harsh environments or in air-handling spaces. Use this
rack for computer equipment, including servers and peripherals. Allow only
qualified service personnel to use this enclosure.
Tools Required
Included Hardware
13mm Socket
M8X40 LAG Screws
Qty 9
10mm Socket
M5.5X9 TAPTITE Screws
Qty 2
T25 TORX Driver
M6X10 Black TAPTITE Screws
Qty 2
T30 TORX Driver
M6 Star Washers
Qty 2
#2 Phillips Screw Driver
Grounding Wire
Qty 1
#1 Flat Screw Driver
Cable Grommets
Qty 5
3/8” Socket Extension
Door Keys
Qty 2
5/32 Drill Bit
3mm Hex Key
Qty 1
Center Chassis
Rear Panel
Door
Caster Kit
Plinth
LOAD CAPACITY: 1000lb (454kg)
