Chase Research IOLAN+, User And Administration Manual

Page: 104 / 150

98
IO LAN +
- User and Administration Guide
host The Destination field is a host IP address and
only packets for that host are allowed across
the gateway.
default Any IP address allowed across the gateway
<dot notation
value>
Only addresses fitting the numerical mask
are allowed across the gateway.
9.8 Host Address
Menu
IOLAN+ uses the information entered on the Host Address
Menu to form an internal host table. The user can then use
the host name in any of the IOLAN+ functions or menus.
** Administrator ** HOST ADDRESS MENU REMOTE-ADMIN
Entry Host name IP Address
1 [mark ] [204.17.209.70 ]
2 [astro ] [204.17.209.6 ]
3 [router ] [204.17.209.254 ]
4 [chase ] [204.17.209.1 ] and so on…
________________________________________________________________________________
Figure 38: Administration - Host Address Menu.
The parameters are as follows:
Host name
This field specifies local name you want to give
a particular host on the network.
IP Address
This field defines the IP address of the host
designated above.
9.9 Kill
Command
The kill command resets the port but keeps the previously
defined configuration. This is used when you change certain
parameters or for when ports get stuck.