31
(2)
Delete:
delete selected component;
(3)
Convert set:
Set convert to the
top of the device
or the
underlying device
, (the
underlying device can set whether mirror or not.)
(4)
Convert:
Convert CSV file to DPV work file,
9.2.2. Material stack station list
Image as below, stack was generated according to the comment of the CSV file. The
same comment of components will use the same stack number. Therefore, how many
different comments, then how many stacks.
PIC9-7
(1)
Edit:
Edit selected material stack. (Note: all of relevant components will be
changed if amend this stack);
(2)
Delete:
Delete the selected material stack. (Note: all of relevant components will
be delete if delete this stack);
(3)
Resort ID:
The material stack ID starting from 1 in ascending order;
(4)
Reverse angle:
Use this function will make the selected stack of components will
rotate 180 degree, all of relevant components will be changed. Some stack with
diode will need to use this function.
(5)
IC Angle compensate:
Compensate IC, rotate 90 degree. Some component
need angle compensate, e.g. SOPB, QFN, etc.
