30
12.3. Backup/Restore
Screen as show below.
Figure
12.5.
Window after “Set / System Set / Backup/Restore”, used to change storage of
system parameters.
(1)
Backup system set:
Backup all of system parameters;
(2)
Restore system set:
Restore all of system parameters;
(3)
Restore factory set:
Restore all of system parameters to factory;
(4)
USB
Import/Export:
The button is enabled when the USB storage device is
connected. Note the imported parameters will not change the system settings
directly, only when executing restore system set.
13.
Files
Used for managing work files and production files, which are generated by PCB
software. The window is show below.
