Charles FSDC-H Series, General Description And Installation

Page: 11 / 11

LT-FSDC-H
1
st
Printing Page 11 of 11
5. TECHNICAL ASSISTANCE AND REPAIR SERVICE
For questions on product repair or if technical assistance is required, contact Charles Technical Support.
847-806-8500
techserv@charlesindustries.com (email)
http://www.charlesindustries.com/techserv.htm
6. MODEL NUMBER INFORMATION
Model Description
FSDCBT08HSCV Fiber Sealed Drop Closure, 8 hardened H-connector (OptiTap compatible) to SC/APC adapters, air
pressure valve (no trays included)
FSDCBS08HSCV Fiber Sealed Drop Closure, 8 hardened H-connector (OptiTap compatible) to SC/APC adapters, one 4"x
6" 24 splice tray, air pressure valve
FSDC2S08HSCV Fiber Sealed Drop Closure, 8 hardened OptiTap compatible to SC/APC adapters, two 4"x 6" 24 splice
trays, air pressure valve
Optional Equipment
97-FSDCAMKT Aerial strand mount brackets
97-FSDCPLKTA Pole mount kit with pole bands
97-FSDCPLKTB Pole mount kit for lag bolts
97-FSDCLTRAY FSDC-H L 12-fiber splice tray and cover kit
97-FIBR24HTRAY 4
” x 9” inch Charles 12/24 fiber splice tray kit
97-SMHTRAY 4
” x 6” inch Charles 12/24 fiber splice tray kit
97-SCA08LF3M 8 fiber fanout
kit: SC APC loose tube 22” breakout, single-mode bend insensitive fiber, 900µm color-
coded buffer, 3 m
PS-SABFM03-9A8 8 fiber pigtail kit, SM bend-insensitive fiber, simplex, 900 µm color-coded buffer, 3 m
CFST-S11020A 1 x 2 PLC splitter tray with 900 µ
m input fiber and SC/APC 900 µm 22” output pigtails in 4”x6” hinged tray
CFST-S11040A 1 x 4 PLC splitter tray with 900 µ
m input fiber and SC/APC 900 µm 22” output pigtails in 4”x6” hinged tray
CFST-S11080A 1 x 8 PLC splitter tray with 900 µm input fiber
and SC/APC 900 µm 22” output pigtails in 4”x6” hinged tray
Table 1 Model Numbers