background image

Section 365–262–205

Fifth Printing, March 2000

Telecommunications Group

2000 Charles Industries Ltd.

CLEI is a trademark of Bell Communications Research, Inc.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.

Page 1 of 17

3652–62 4-Wire E&M with PLR and ER Channel Unit
3652–68 4-Wire E&M with PLR and ER Channel Unit

Complies with UL Standard 1459 Second Edition (3652–68 Only)*

CONTENTS

PAGE

Part 1.

GENERAL

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 2.

INSPECTION

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 3.

APPLICATION GUIDELINES

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 4.

CIRCUIT DESCRIPTION

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 5.

MOUNTING

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 6.

INSTALLER CONNECTIONS

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 7.

OPTIONS

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 8.

ALIGNMENT

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 9.

TESTING

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 10.

TECHNICAL ASSISTANCE

15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 11.

WARRANTY & CUSTOMER SERVICE

15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Part 12.

SPECIFICATIONS

16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

3652–62

LINE

DROP

BUSY

NORM

LINE

DROP

LINE

DROP

&

R

E

&

M

T1

&
R1

BUSY

4W E2M2

ISSUE 5

Figure 1.  3652–62 4W E&M with PLR and ER (Issue 5) Channel Unit

Summary of Contents for 3652-62


















Reviews: