Operate - 16
S2B Operator’s Manual
Load and Unload
Load and Unload
Load Machine
1.
Park vehicle with trailer on level and firm ground.
2.
Ensure trailer is correctly attached to vehicle.
3.
Move machine to rear of trailer. Have boom face ramps. Align tracks or tires with ramps and machine
with center of trailer bed.
4.
Slowly drive unit onto trailer, digging boom first, until tiedown position is reached.
5.
If space allows, push boom control to lower digging boom onto trailer.
6.
Engage parking brake and shut down unit. If present, turn fuel shut-off to off position.
Tie Down
Crushing weight could cause death or serious injury. Stay
away.
To help avoid injury:
•
Keep boom as low as possible during loading procedure.
•
Ensure ten to fifteen percent of total weight (machine plus trailer) is on tongue of trailer.
IMPORTANT:
See machine operator’s manual for specific loading and tiedown information.
Crushing weight could cause death or serious injury. Stay
away
To help avoid injury:
•
Only use approved tiedown points.
•
Use applicable tiedown equipment.
•
Ensure tiedowns are secure before transport.
IMPORTANT:
See machine operator’s manual for specific loading and tiedown information.