background image

Grease Tray

Grease Pan

15

16

(over-fill protection device)

to grill and regulator. 

Place Lp tank into hole in bottom shelf with tank collar opening facing to side as shown. Finger tighten tank retainer screw to hold 
LP tank securely in place. 

LP tank is sold separately. Use only with an OPD 

 equipped LP tank. Fill and leak-check before attaching 

See Use and Care section to correctly Leak Test and perform the Burner Flame Check.

Insert regulator through the large hole on left side panel.

LP Cylinder

(not included)

CAUTION

Failure to install tank correctly may 
allow gas hose to be damaged in 
operation, resulting in the risk of fire.

LP Tank

LP Cylinder

(not included)

Always keep LP cylinders in
upright position during use,
transport, and storage.

Regulator

Cylinder screw at rear of cart

Tank Retainer Screw

Attach the heat shield to grease tray with  

#8-32x3/8” sheet metal screws (A)

.

Place

 

grease pan into grease tray, then place the tray into the cart (B).

A

B

Heat Shield

Grease Tray

CAUTION

Failure to install grease tray and 
grease pan will cause hot grease to 
drip from bottom of grill with risk of 
fire or property damage.

26    

Sheet Metal Screws

Qty. 2

#8-32x3/8" 

Summary of Contents for 463221311

































Reviews: