ASSEMBLY
To begin assembly, Attach the legs to the
underside of the Firebox using 2 each 1/4-
20x1/2” screws and 2 each 1/4-20 flange nuts
per leg. Insert screws from inside the firebox -
all nuts go on the outside of the firebox.
Tighten all nuts securely.
2
1
Attach the lid handle to the grill lid by
inserting the handle rod into the holes in
the lid. Secure the handle with two
1/4x20 flange nuts from underneath the
grill lid.
Tighten securely.
1/4-20x1/2” screws
Total of 4 each
NOTE:
If the handle spring
is not already installed on
the handle rod - slip it over
the handle rod before
installing the handle.
Page 8
1/4-20 nuts
total of four each
