Page 13
5
This step requires a helper!
The 11301714 Grill is now ready to receive the firebox. With the aid of a helper, position the firebox alongside
the grill, aligning the bolt holes. Insert 6 each 1/4-20x1/2" screws from inside the firebox through the grill.
Secure with six each 1/4-20 flange nuts, do not fully tighten at this time.
6
1/4-20
Flanged Hex Nut
Qty. 6
CAUTION: Wear Safety Glasses and Gloves!
Next, working from outside the grill, use your hammer and drift punch to bend the screw hole tabs inwards. If the
tabs do not break off completely, use your pliers from the inside the grill to twist the tabs until they break off.
There are six holes that will need punched out as indicated with circles below.
Tab
Lid not
shown for clarity
1/4-20x1/2”
Hex-Head Screw
Qty. 6
