Page 5
Description
The DT100 Dump Trailer is designed for equestrian, agricultural, contractors and other customers as an all round
heavy duty, reliable hydraulic tipping trailer.
It’s 1 ton payload capacity is perfect for moving soil, dung, stone plus
much more with ease and paired with a twin pivoting axle including flotation tyres allows for easy towing off-road.
The DT100 is a trailed attachment, attaching to the towing vehicle with a 50mm ball hitch connection with integral
overturn safety swivel hitch. A unique automatic latch/unlatch system is installed in the rear tailgate alongside a
large 50° tipping angle for hassle free emptying. The DT100 is installed with an electric operated hydraulic system,
complete with wired hand remote that attaches to the back of your ATV, UTV of 4×4 and on-board battery for the
ultimate convivence.
These machines should however only be used to perform tasks for which they were designed - use of the machine
for any other function may be both dangerous to persons, and potentially damaging to components. Use of the
machine beyond the stated usage may invalidate any applicable warranty, as well as being potential in breach of
applicable safety regulations.
Note: This machine is for off-road use only and is not designed or approved for highway travel
Identification
Each machine is fitted with a serial plate (shown below) which details the following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional
equipment, ensure you have this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for
replacement decals before use.
Note:
All decals must be present and visible. It is imperative that these are replaced
if damaged to prevent potential harm to users.
1.
Carefully read operators manual before handling this machine. Observe instructions and safety rules
when operating.
2.
WARNING - Attach support before getting into hazardous area.
3.
WARNING - Never reach into the crushing danger area as long as parts may move.
4.
WARNING - Avoid fluid escaping under pressure. Consult technical manual for service procedures.
