Back Panel Continued
7. HDMI Connector:
Connect an HDMI monitor to the HDMI connector to view the main monitor display.
Audio can also be outputted from this connector.
8. Ethernet Connector:
(lower port)
Connect the DVR to a 10/100Base-T Ethernet network through this port.
9. eSATA Connector:
Use this port to external SATA storage device for HDD extension.
10. RS-232 Connector:
Use this connector to PTZ camera(s), GPS modem, or POS system.
11. Alarm Input Connectors:
(Panic, Alarm Set/Unset, Alarm In 1-16)
Use these connectors to external devices, such as sensors or door switches.
12. Alarm Output Connectors:
(Alarm Out 1-4)
Use these connectors to (2) Normally Closed (NC) alarm outputs (1-2) and 2 Normally
Open (NO) alarm outputs (3-4).
13. RS-485 Connector:
Use this connector to connect to the DVR to a RS-485 compatible PTZ camera or keyboard.
Refer to the manual of the PTZ camera being used to verify you are using the correct settings.
14. Power Input:
(12vDC in)
Connect to the included 12vDC power supply.
15. Power Switch:
(Power)
Use this switch to turn the unit on/off.
16. USB Mouse Connector:
(Reserved)
Connect to USB 2.0 compatible mouse.
8