Scheduled Record Setup Continued
In a time segment, if both Alarm and Motion are set to “Off”, the audio/video will record normally
unless video loss is detected. General operations for Scheduled Record: Easy Setup menu are
defined below. This menu allows the administrator to use a simple and easier way to set the
scheduled recording of the system. In Easy Setup, there are Six Selectable Recording Modes:
Alarm+Normal, Alarm+Motion, Alarm, Motion, Normal, and No Record. Video & Audio are all
recorded for the selectable Recording Modes except “No Record”. After the Easy Setup, the time
segments for each day in Scheduled Record will be changed accordingly.
•
▲▼
:
(
Mouse: Left click) Use these buttons to select the desired menu or area.
• Copy:
Use this button to copy the settings of the current camera to all the following cameras.
• Numeric 1-6:
(Mouse: Left click) Use these buttons to select the active Recording Mode.
Press Enter on the recording mode to activate it. The Recording Modes are :
“1”Alarm+Normal, “2” – Alarm+Motion, “3” – Alarm, “4” – Motion, “5” – Normal, “6” – No
Record, and Others (not selectable).
• +/- :
(Mouse: Left click and drag) Use these buttons to set the focus interval (one grid for one
hour) upwardly/downwardly to the Active Recording Mode. The user may also press ENTER to
set the focus interval to the Active Recording Mode.
• Esc:
(Mouse: Right Click) Use this button to escape from the current screen, and return to the
previous menu. The time segments for each weekday in Scheduled Record will be updated
accordingly.
◄►
37