HDD Installation
1. To install a hard drive, power off the DVR & use a Phillips screwdriver to remove the cover.
2. Remove the brackets you are going to use from the DVR using a Phillips screwdriver.
3. Secure the hard drive to the brackets that you removed using the provided screws and a
Phillips screwdriver.
4. Place the hard drive you connected to the brackets back into the DVR, and secure it with a
Phillips screwdriver.
5. Plug in the SATA cable(s) and power cable(s) to each HDD.
Each of the hard drives must be formatted before it can be used to record video/audio.
Note:
If you install a DVD burner (not included) it must be connected to SATA #6 connector on the
16 Channel DVR, or the SATA #2 connector on the 4 or 8 Channel DVR.
Refer to page 39 for instructions on how to format the HDDs.
16 Channel Model
4 & 8 Channel Model
11