IN
OUT
6
7
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
A-BUS is a register trademark of LeisureTech Electronics Pty Ltd
4.
Open the slide-out cradle and dock your iPod.
5.
Enjoy your music!
Slide-out Cradle
Connections:
Stripping and Connecting CAT-5 Wire
AB-311
(shown with iPod mini installed next to AB-114 keypad)
Specifications:
(typical @25º C)
Operating Voltage :
24±.5VDC
Cable requirements:
CAT-5 or better
Operating Temperature:
-10ºC to +50ºC
Specifications subject to change without notice.
Trouble?
1) Be sure you have connected the CAT-5 cable correctly. Note that the
stripe/solid pattern should match the labels on the product. Miss-wiring
can cause distorted sound or prevent the system from working at all!
2) Be sure you have connected the speakers in phase. Follow the label
on the product. Out of phase speakers can rob the system of its bass.
Especially when driving dual-voice-coil speakers.
Connection Tips and Troubleshooting
Input/Output
... To simplify installation, the
AB-311 has both 110 and RJ-45 inputs and
outputs. Only one of the inputs and one of the
outputs should be used at a time.
Blade
Cat5
1.
Place the CAT-5 between the blade and the first notch of the J-110 tool.
CAT-5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
Slight
pressure
Rotate
1 turn only
2.
Rotate the tool only once around the CAT-5. Multiple
turns will cause you to cut into the inner wires.
3.
Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
4.
Use any standard 110 punch-down tool to properly seat all wires.
Note: Do NOT use a screwdriver or any other tool that is not specifically
designed for terminating UTP cable. Using improper tools will damage
the connector!
