Menu Operation
* When TV signals is Cable.
• Auto tuning
Select the
ENTER
button to start Auto tuning.
1. Adjust the Cable Scan Menu.
station channels and stores them in the TV.
If you select
Quick Scan
, you can set up
the Frequency, Network ID and Symbol
(Ks/s) manually by pressing the button on
the remote control. Quick Scan can only
search DVBC digital programmes, can not
search for ATV programmes.
If you select
Full Scan
, the Auto Tuning will search through all or appointed
frequencies to find available channels.
- Frequency:
Enter a user-defined frequency. (Differs in each country)
- Network ID (Auto/Manual):
Selects the Network ID setting mode among Auto or
Manual. When Network is Manual, you can set up Network ID using the numeric
buttons.
- Symbol (Ks/s):
Selects the Symbol (ks/s) setting mode among Auto or Manual.
When Symbol (ks/s) is Manual, you can set up Symbol (ks/s) using the numeric
buttons.
When you are satisfied with your setting, press
ENTER
button.
2. Select the country and tune type for channels.
3. The TV will begin memorizing all of the available channels.
• CADTV Manual Tuning
Frequency, Symbol (ks/s), and QAM Type are needed in order to add a programme
correctly in DVB cable mode. Please inquire of the cable service provider about the
correct values.
• ATV Manual Tuning
Manual store for ATV channels.
Press the
▲
/
▼
button to select items.
Press the red button to save it.
Press the
EXIT
to exit.
- Scan type:
Scans for all active broadcast
Press the
◄
/
►
button to adjust it.
12