Chandler AMETEK 5617, Instruction Manual

Page: 21 / 42

3-4 SECTION 3
–
MAINTENANCE
3
-4
S
E
CT
IO
N 3
–
MA
IN
T
E
NANC
E
S
CH
E
DUL
E
Maintenance Schedule
MAINTENANCE SCHEDULE
INSTRUMENT NAME
COMPONENT EACH TEST MONTHLY 3 MONTHS 6 MONTHS ANNUAL
Sample Rack and Containers Disassemble, Clean,
Inspect
Motor Drive Disassemble, Clean, Inspect
Oil Replace
Low Pressure Filter Replace

High Pressure Filter
Disassemble, Clean,
Inspect Replace
Cylinder Pressure Release Valve Replace
Cylinder Clean, Inspect, Replace
Mineral Oil
Air to Cylinder Valve Replace
Air Operated Valve Disassemble, Replace
Needle, Seat
Pump Maintenance by Qualified
Factory Service Technician
Pressure Gauge
⚫
Calibration
Temperature Controller Thermocouple Inspect
⚫
Calibration Calibration by Qualified
Factory Service Technician
Pressure Transducer Inspect
⚫
Calibration Calibration by Qualified
Factory Service Technician
Heater Test by Qualified Factory
Service Technician
Reservoir Clean-out by Qualified
Factory Service Technician
Rupture Disc Replace
This maintenance schedule applies to normal usage of two tests per day. Detailed procedures for these operations are contained in your manual.
⚫
Per API Specifications

Where Applicable