ACM-198 / ACM-198C
Return Fitting Ultra Bright LED Light
STEP 1
TURN OFF POOL PUMP BEFORE
STARTING INSTALLATION.
STEP 2
From existing return fitting, unscrew
large, ribbed nut
!
and remove eyeball
"
.
STEP 3
Unscrew inner sleeve*
#
. DO NOT
UNSCREW EXISTING RETURN FITTING.
*Keep this part in case you remove the return
fitting light.
STEP 4
Install return fitting light
$
over the
return fitting. Align and secure in place with
large nut
%
.
Do not overtighten
.
STEP 5
From existing return fitting, replace
eyeball
"
and ribbed nut
!
.
STEP 6
Make sure the electrical cord
&
and transformer
'
are out of the water.
STEP 7
Slide plastic O-ring
(
onto
transformer plug.
STEP 8
Insert pins
)
into transformer outlet
and secure with cap. The transformer
'
should be plugged into a GFCI outlet.
NOTE: ACM-198C Remote Control
instructions included with remote.
Champlain Plastics Inc.
87 Pillsbury Road, Rouses Point, NY 12979
(INS-ACM198-rev2)
• Risk of electrical shock, if instructions are not
followed. Connect only to a grounded GFCI outlet
that is a minimum of 10 feet (3 m) away from the
pool.
DO NOT USE EXTENSION CORDS.
• Do not let children use this device unsupervised.
• For use on permanent above-ground pools only.
• Do not use the light if the lens, transformer or
cord is damaged.
WINTER STORAGE: Freezing weather may
damage light fixture.
Disconnect light and
remove from the pool. Store in dry space at room
temperature.
WARNING
(
)
*
! " #
Pool W
all
Liner
Existing
return
fitting
Pool W
all
Liner
Existing
return fitting
Pool W
all
Light
&
$
%
Pool W
all
Light
%
Pool W
all
Light
! "
