Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
www.championindustries.com
(1M) 9/06 Printed in U.S.A.
CH083
SPeCIFIeR STaTeMeNT
Specified unit will be Champion Model 44 DRWS
water saver high temperature dual rinse rack conveyor
dishwashing machine. Constructed of Type 304
stainless steel and measuring 44” long with 20-3/4”
vertical opening. Features top mounted control
cabinet; upper and lower one-piece stainless steel
spray arm assemblies, removable internal scrap basket
with two-piece scrap screen. Large 26” wash door with
front access and double-hook safety latch. Anti-jam
conveyor drive system.
1 year parts and labor warranty.
Shown with Vent Cowl
and Damper Option
STaNdaRd FeaTUReS
• ENERGY STAR® Qualified
•
Exclusive DualRinse Technology
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper
& lower spray arm assemblies
• Internal removable scrap baskets and
two-piece scrap screens
• Standard vertical opening accommodates
18” x 26” sheet pans
• Wide 26” leakproof door, internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closure
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Electric tank heat
• Wash pump 2 Hp motor
• Stainless steel pump and impeller
• Single-point electrical connection
Model
44
d
RWS
Ra
Ck
Co
N
veyo
R
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption
while
circulating a generous
300+ gallons of water for
Consistently Good Results
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Model 44 dRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Model 44 dRWS
Model
44
d
RWS
Ra
Ck
Co
N
veyo
R
oPTIoNS & aCCeSSoRIeS
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
cradle assembly
Booster Heaters
(completely interplumbed, controls are interwired)
Steam: 40°F - 70°F rise
Electric: 10 kW (40°F rise) (built-in only)
Electric: 16 kW (70°F rise) (built-in only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended Vent hood, stainless steel with 7” stack and
locking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20-3/4”) for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Model 44 dRWS
leSS IS MoRe WITh ChaMPIoN’S dUal RINSe Model 44 dRWS
Check our NSF listings and you’ll see the 44 DRWS offers the lowest water consumption in its class with less than
.54 US gallons per rack. Water consumption this low means energy savings too. Our 40°F rise booster only requires 10 kW and
70°F rise is only 16 kW.
What the numbers don’t show you is the advantage that our Dual Rinse technology provides by making sure
all wares are fully rinsed with more than 300 gallons per hour while actual fresh water consumption is only
80 gallons per hour.
eFFICIeNT NeW
SPRay SySTeM deSIGN
To make the E-Series more efficient and
more forgiving we designed a new spray arm
system that includes:
• Wall-of-water spray pattern via stainless
steel fluted directional spray jets for
quick and efficient washing
• Easily removable spray arm assembly for
ease of cleaning
• Stainless steel pump housing
and impeller
• Larger tanks hold more water for better
washing results
INTeGRaTed
booSTeR heaTeR
As well as the E-Series performs, we created
a way to make it perform even better. The
electric booster heater may
be optional, but it is an exceptional value
— engineered within the E-Series footprint
to offer a variety of advantages over other
booster designs, such as:
• Inter-plumbed and inter-wired
• One control shuts off washer
and booster
• 10 kW for 40°F rise
• 16 kW for 70°F rise
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
• Integrated design saves floor space
Wall-of-Water Spray Pattern
Built-in Scrap Basket
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless Steel
Spray Assembly
