The Flexible Warewashing System!
Champion’s prewash, wash, and rinse drive
modular units will provide the design flexibility
to equip any size or shape dishroom with a high
production, fully-equipped rack conveyor
warewashing machine.
The 44 Modular Series is available in several corner
configurations to accommodate special needs.
Racks are moved automatically by means of a 90°
curved pawl bar and straight conveyor.
Three prewash units are available: 22" straight light
duty, 36" straight heavy duty, and 39" corner heavy
duty versions.
Wash units are available in either a single straight
through wash/drive, or a two-unit system with a corner
wash and final rinse drive.
(3M) 3/99
44 Modular Series
44KPRB Corner
Single Tank Rack Conveyor
Modular System
QUICK FACTS
Capacities
Racks per hr. (NSF rated)
158
Wash tank (gal.)
20
Conveyor speed (ft./min.)
5.6
Motor horsepower
Drive
1/4
Prewash 22", 36" & 37"
1
Wash
2
Water consumption
Gal. per hr. (max. use)
324
Gal. per rack
2.05
Temperature °F
Wash
160
Rinse
180
Heating
Tank heat, electric (Kw)
15
Tank heat, steam (lbs./hr.
required at 15 psi flow pressure)
75
Electric booster (Kw required for 40° rise)
38
Electric booster (Kw required for 70° rise)
63
Steam booster
(lbs./hr. required for 40° rise)
170
Steam booster
(lbs./hr. required for 70° rise)
280
Venting
Load end (minimum cfm)
150
Unload end (minimum cfm)
400
*Shown with optional load end panel
Standard Features
Automatic tank fill
Common utility connections
Control circuit, 120-volt
Convenient top-mounted controls
Conveyor drive 1/4-Hp motor
Door activated drain closure
Door safety switch
Enclosure panels (front and unload end)
Energy Sentinel (idle pump shut-off)
External scrap basket on prewash units
Interchangeable spray arms
Leakproof doors, internally fitted
Low-water tank heat protection
Prewash motor: 1-Hp, Wash pump motor: 2-Hp
Rinse saver device
Stainless steel construction, including base and feet
Tank heat, choice of electric, steam coil or
steam injector
