background image

100535 - 27 IN. 2-STAGE SNOWBLOWER

IMPORTANT SAFETY INSTRUCTIONS

8

Safety Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these 
symbols will allow you to more safely operate the product.

SYMBOL

MEANING

Read Operator’s Manual.

 To reduce the risk of injury, user must read and understand operator’s manual 

before using this product.

Eye and Ear Protection. 

Always wear safety goggles or safety glasses with side shields, and as 

necessary a full face-shield as well as full ear protection when operating this product. Always wear eye 
protection with side shields marked to comply with ANSI Z87.1.

Safety Alert.

 This machine was built to be operated according to the safe operation practices in this 

manual. As with any type of power equipment, carelessness or error on the part of the operator can 
result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing 
foreign objects. Failure to observe the safety instructions could result in serious injury or death.

Electric Shock.

 Failure to use in dry conditions and to observe safe practices can result in electric 

shock. Improper connections to a building can allow current to backfeed into utility lines, creating an 
electrocution hazard. A transfer switch must be used when connecting to a building.

Fire/Explosion.

 Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause 

severe burns or death. Operation of this equipment may create sparks that can start fires around dry 
vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or 
regulations relating to fire prevention requirements.

Toxic Fumes. 

The engine exhaust from this product contains chemicals known to cause cancer, birth 

defects and other reproductive harm.

Risk of Asphyxiation. 

This engine emits carbon monoxide, an odorless, colorless poison gas. Breathing 

carbon monoxide can cause nausea, fainting or death. Use only in a well-ventilated area.

Thrown Objects. 

This machine may pick up and throw objects which can cause serious personal injury.

Always Use Chute Tool. 

Never use your hands to clear a clogged chute assembly. Shut OFF engine and 

remain behind handles until all moving parts have stopped before unclogging.

Summary of Contents for 100535

























Reviews: